| Technological process and losses while manufacturing house-building beam on a splicing line of lamellas of unlimited length LSB-1000
|
| Operation | Blanks section, mm | Equipment
| loss factor, %
| | First calibration | 53×200
| 4-Side Moulder S26-4 | 1,035
| | Cutting defects and jointing |
| Optimization cutting line ORD-100 | 1,2
| | Second calibration | 48,5×198
| 4-Side Moulder S26-4 | 1,16
| | Gluing beam | 242,5×198
| Splicing line of lamellas of unlimited length LSB-1000 |
| | Clean calibration | 240×190
| 4-Side Moulder S26-4 | 1,09
| | Total loss factor |
| | 1,57
|
|
Content
