 |
TOP 20
|
|
|
|
|
Project "Glued Beam"
Glued window beam manufacture on finger jointing line LSP - 500
|
Planning plot for glued beam manufacture
|
|
Specification of the complex equipment for glued beam manufacture
|
|
| Nr. | Equipment title | Quantity
pcs.
| Power, kilowatt | Technological operation
|
| | Basic equipment |
| |
| | 1. | Quadrilateral Planning-Milling Machine (4-Side Moulder) S18-4 | 2 pcs.
| 2x22,0
| First and second calibration
| | 2. | Automatic trimmer ORD-100 | 1 | 12,7
| Optimized blank cutting to size and defects
| | 3. | Splicing line of workpieces endways LSP-500 (automatic, with two tenoning blocks) | 1
| 38,0 |
Blank jointing on machine to bars with length up to 6 m
| | Instrument: | | |
| composing disk shaped cutter in assembly with 4 knifes Ø160х40х7,6 mm (4 coplexes with height of 160 mm) | 84 | |
| reserve knife (h=3,8 mm) | 10 | |
| disk-shaped saw Ø255х80х4,2 mm with milling crusher-cutter | 2 | |
| disk-shaped saw Ø400х32х4,0 mm | 1 | |
| 4. | Glue-spreading arrangement KU-9 with roller bed 6 m | 1 | 0,4
| Bars preporation before gluing in press
| | 5. | Hydraulic Press VGS-140/6m
| 1
| 4,0 |
Beam gluing (length 6 m, loading height up to 1,5 m)
| | | Total | 7
| 99,1 |
|
Structure of splicing line of workpieces:
|
- two-section loading conveyor;
- 1-st tenoning machine (carriage width 430 mm; sawing block 5,5 kilowatt; milling block 7,5 kilowatt;
- 2-nd tenoning machine with automatic glue-spreading arrangement;
- Press automatic loading system, includes:
- accumulation conveyor;
- feeder with canter;
- catenary conveyor;
- hydraulic, 6 m length press with cutting block and hydraulic unit;
- electrical cabinet with management panel
|
|
|
