"LDA-1000".
Mechanical sawing complex LDA-1000 on the saw basis disk machines

Description of technological process

By gantry crane wood is loaded to exchange(4), from which by spool conveyor(5) it arrives to disk machine LDA-40(1), where carriage and side unedged planks sawing to given sizes takes place, with waste removing by belt conveyor (12).

Carriage and planks devide on conveyor with help of destributive roller beds (6).

Unedged planks by conveyors move to multilayer machine MDS-60 (2), at which we receive edged plank.

Carriage with the help of roller-pusher (8) by inclined slope (9) arrive to driving rollers leading to multisawing machine MDS-160 (3).

Recieved edged planks from multisawing machines are moved to separatory machines (15), where parting-off into size is carried out, for following loading of drying cells.

LDA-1000 is capable of processing up to 2500 m³ of lumber per month, i.e. 120 m³ per shift.

Advantage of complex is high percent withdrawal of saw timber from beams with diameter from 100 to 400 mm, and with specific saw cut technology beams can be sawed without sorting (for example, into beam with section 125х95 mm).

Due to absence of pneumatics and hydraulics in control LDA-1000 complex can function in low temperature conditions, doesn't need complicated reset or highly qualified workers.