| 1. |
Pass-through section of blanks (WхН): |
|
| |
- maximum, mm |
400 x 250 |
| |
- minimum, mm |
50 x 20 |
2. |
Quantity of tenoning spindles, pcs. |
4 |
| 3. |
Type of processed stock |
lumber of any species |
| 4. |
Quantity of pneumatic-cylinders, pcs. |
4 |
| 5. |
Nominal air pressure in airset, Mpa |
0,6 |
| 6. |
Diameter of outtake branch, mm |
200 |
| 7. |
El. motor of tenoning spindle |
4 pcs./7,5 kilowatt/3000 rpm |
| 8. |
El. motor of horizontal tenoning unit drive |
1 pcs./0,75 kilowatt/1500 rpm |
| 9. |
El. motor of vertical tenoning unit drive |
1 pcs./4 kilowatt/1500 rpm |
| 10. |
Giving speed of tenoning units, m/min. |
0-12(smooth) |
| 11. |
Supply network: |
|
| |
- type of current |
variable 3 phase |
| |
- frequency of current, Hz / voltage, In |
50 / 380 |
| 12. |
Installed power, kilowatt |
32,25 |
| 13. |
Overall dimensions (length x width x height), m: |
2,89 x 1,99 x 2,79 |
| 14. |
Mass of machine, kg |
2500 |
TOP 20
