Finger jointing line LSP - 1000

		Splicing line LSP-1000 is intended for splicing wood blanks endways.
Splicing line productivity - 2200 running meters per hour (at sectional view of workpieces 91х28 and average length 500 mm)

Base complete set of splicing line:

1.  Five section loading conveyor 2.  1-st tenon cutter 3.  2-nd tenon cutter with glue superimposing device 4.  Automatic loading press system: 4.1.  The accumulative conveyor 4.2.  A feeder with a tipping device continuously working (without idle) 4.3.  The conveyor - store in length of 3 m 5.  Two-stage hydraulic squeezer of 6 m length with the preliminary prepressing block, detachable unit and hydroelectric station 6.  An electric cabinet with control panel

At customer's request the splicing line can be completed by additional options : Maximum diameter of the milling instrument - 250 mm; glue superimposing device made of stainless steel;      The splicing line can be equipped with splitting blocks for "hidden" connection of workpieces for furniture boards (see picture).

Technical description

TENONING MACHINE:
1.	Quantity, pcs.	2
2.	Maximum height of blanks package, mm	160
3.	Minimum height of blanks package, mm	15
4.	Working area's width carriage's table, mm	600
5.	Carriage travel, m	1,4
6.	Minimum blank's length, mm	170
7.	Maximum blank's length, mm	1000
8.	Characteristics of sawing instrument:
	- diameter of disk-shaped saw blade, mm	255
	- saw planting diameter, mm	80
	- diameter of cutter-crusher, mm	244
	- number of rotations, rpm	3000
9.	Characteristics of tenoning cutter:
	- diameter, mm	160(250)
	- planting diameter, mm	40(50)
	- lead, mm	3,8
	- number of rotations, rpm	6000(5000)
10.	Carriage travel speed, m/min	1,5...25
11.	Quantity of cycles in 1 hour	330
12.	Electric motors:
	a) actuator of facing block:
	- power, kilowatt	7,5
	- number of rotations, rpm	3000
	b) actuator of tenoning spindles:
	- power, kilowatt	18,5
	- number of rotations, rpm	3000
	c) actuator of giving carriage:
	- power, kilowatt	0,75 (1,1)
	- number of rotations, rpm	3000 (1500)
	d) actuator of carriage conveyor:
	- power, kilowatt	0,37 (0,55)
	- number of rotations, rpm	1500
13.	Nominal air pressure in airset, Mpa	0,63
14.	Overall motor power, kilowatt	27,12х2
15.	Characteristics of outtake branch on each machine:
	- diameter, mm	125
	- quantity, pcs.	1
	- diameter, mm	150
	- quantity, pcs.	1
16.	Overall dimensions of each machine:
	- length, mm	2560
	- width, mm	1860
	- height, mm	1440
17.	Mass of each machine, kg	1800
PRESS:
18.	Maximum pass-through section of blanks, mm	160(200)х80
19.	Minimum pass-through section of blanks, mm	20х15
20.	Glued blanks length, m	2...6,05
21.	Quantity of cycles in 1 hour	360
22.	Maximum pressure in hydraulic system, Mpa	12,5(16,0)
23.	Force of pressure (at 12,5 Mpa), t	9,8
24.	Nominal air pressure in airset, Mpa	0,63
25.	Characteristics of disk-shaped saw:
	- diameter, mm	400
	- planting diameter, mm	32
	- number of rotations, rpm	3000
26.	El. motor of saw:
	- power, kilowatt	2,0
	- number of rotations, rpm	3000
27.	El. motor of actuator of hydraulic aggregate:
	- power, kilowatt	4,0
	- number of rotations, rpm	1500
28.	El. motors of underpress barrels:
	- quantity, pcs.	2
	- power, kilowatt	2,2
	- number of rotations, rpm	3000
29.	Characteristics of outtake branches:
	- diameter, mm	100
	- quantity, pcs.	2
30.	Overall dimensions:
	- length, mm	7250
	- width, mm	1250
	- height, mm	1520
31.	Mass, kg	2200
CONVEYORS & FEEDER:
32.	Power of el. motors, kilowatt	7,76
	Overall power of installed el. motors, kilowatt	72,4
	Total mass, kg	7800
	Dimensions of equipment in plan, m	18,0х6,7

Equipment list

UP