 |
TOP 20
|
|
|
|
|
|
Multi-saw machine MDS - 60 |
|
 |
 |
 |
 |
Multi-Saw Ripper MDS - 60. The ripper is intended for longitudinal sawing of semi-timber and edging board
|
 |
|
Multi-Saw Ripper MDS - 60
It is intended for longitudinal
sawing of semi-timber
and edging board for edged material.
|
|
| Technical features
|
- The Multi-Saw Ripper can be used both in structure of the sawing line, and independently.
- The Multi-Saw Ripper consists of a bench, saw unit, feeding mechanism, grabbing protection and fencings.
- The drive on the spindle block is transmitted from the electric motor by means of belt-stretch.
- Workpiece is seized by driving pressure rollers and moves ahead in a processing zone of sawing to the saw block with the certain sawing schedule.
- The exit is equipped with receiving rollers, which put forward the edged material from workpiece range.
- The machine provides for continuous adjustment of feedinf speed of workpieces for sawing.
- The Multi-Saw Ripper is reliable, high-efficiency and easily controlled, can be maintained in at the temperature of air below zero.
|
| 1. |
Maximum height of saw cut, mm |
60 |
| 2. |
Minimum width of blank, mm |
600 |
| 3. |
Minimum length of blank, mm |
1000 |
| 4. |
Diameter of disk-shaped saws (maximum), mm |
400 |
| 5. |
Roller's speed of rotation, rpm |
3200 |
| 6. |
Speed of stepless giving material, m/min |
5...20 |
| 7. |
Power of main el. motor, kilowatt |
45 |
| 8. |
Overall dimensions, mm |
2520х2225х1546 |
| 9. |
Mass of machine, kg |
3862 |
|
|
