| 1. |
The sizes of processed workpiece: |
|
| |
- maximum width, mm |
200 |
| |
- maximum thickness, mm |
250 |
| |
Milling unit: |
|
| 2. |
Maximum mortise depth, mm |
46 |
| 3. |
A fill of groove, mm |
95 |
| 4. |
A course of milling unit, mm |
250 |
| 5. |
A method of feed of milling unit |
mechanical |
| 6. |
Quantity of spindles, pcs. |
2 (upper, lower) |
| 7. |
Maximum diameter of milling cutters, mm |
200 |
| 8. |
Diameter of planting aperture, mm |
32 |
| 9. |
Number of revolutions of spindles, rpm |
5740 |
| 10. |
Type of processed stock |
lumber of any species |
| 11. |
Electric motors of spindles: |
|
| |
- quantity, pcs. |
2 |
| |
- capacity, kilowatt/quantity of turnovers, rpm. |
2,2(3) / 3000 |
| 12. |
Supply network: |
|
| |
- type of current |
variable 3 phase |
| |
- frequency of current, Hz /voltage, In |
50 / 380 |
| |
Drilling unit: |
|
| 13. |
Feeding method of drilling unit |
manual |
| 14. |
Maximum diameter of the instrument, mm |
16(30) |
| 15. |
Number of revolutions of spindle, rpm |
8000 |
| 16. |
Capacity of the electric motor, kilowatt |
1,5 |
| |
The block processing grooving a hearth of a window and a door |
|
| 17. |
Feeding method for unit |
mechanical; |
| 18. |
Capacity of the electric motor of a spindle, kilowatt |
4,0 |
| 19. |
Number of revolutions, rpm |
up to 8000 |
| |
Roller paths: |
|
| 20. |
Roller paths (quantity / total length / breadth): |
2 pcs./12 m/400 mm |
| 21. |
Dimensions (length x breadth x height), m: |
12,0 x 1,5 x 1,35 |
| 22. |
Mass of machine, kg |
1500 |
TOP 20
