 |
TOP 20
|
|
|
|
|
|
Hydraulic press VGS - 140 (for glued beam) |
|
 |
 |
 |
 |
Hydraulic press VGS - 140
for gluing - building and house constructional squared beam from 3 m to 18 m
|
 |
 |
 |
Hydraulic Press VGS-140 is intended for gluing beams from wooden workpieces of different sizes, manufacturing of structural sawn timber and boards which can be applied in house building.
|
The upper side pressing is provided by hydraulical cilinders
The sidelong pressing is implemented by pneumatical cilinders |
| 1. |
Overall dimensions of glued workpiece: |
|
| |
- length, m |
6 (12, 18) |
| |
- maximum height, mm |
1500 |
| |
- maximum width, mm |
250 |
| |
- minimum width, mm |
70 |
| 2. |
Quantity of sidelong pneumatical hold-down tool, pcs. |
3 (6, 9) |
| 3. |
Quantity of hydraulical cilinders, pcs. |
10 (20, 30) |
| 4. |
Diameter/lead of piston in pneumatical cilinder, mm |
100/100 |
| 5. |
Diamteter/lead of piston in pneumatical cilinder, mm |
100/160 |
| 6. |
Maximum pressure in hydraulic system, Mpa |
12,0 |
| 7. |
One cilinder force of pressure (at 12,5 Mpa), kg |
9800 |
| 8. |
Power of hydraulic unit el. motor, kilowatt/rev. |
3,0/4,0 |
| 9. |
Pressure in pneumatical network, Mpa |
0,6 |
| 10. |
Overall dimensions of 6 m press(length x width x height), m: |
8,0 x 1,3 x 2,5 |
| 11. |
Mass of 6 m length press, t |
6 |
| 12. |
Overall dimensions of hydraulic unit(length x width x height), mm: |
850 x 500 x 1050 |
| 13. |
Mass of hydraulic unit (without oil), kg |
120 |
|
Press construction allows to produce squared beam of different length using additional 3 m length sections.
Frequent displacement of cilinders gives even distribution of force of pressure to all workpiece length.
Presses have durable and hard construction, massive and cast adjustable basic tables and pressing shoes, which allows to supply high quality of qlued details.
|
Hydraulic press VGS (horizontal) - 140AM
for gluing long-length multilayer constuctional squared beam of 12 m length
|
|
Hydraulic press VGS (horizontal) - 140AM is intended for gluing blanks in thickness to multilayer constructional squared beam. Maximum dimensions of glued beam (thickness х height) 250х1200 mm |
| 1. |
Overall dimensions of glued workpiece: |
|
| |
- length, m |
12 |
| |
- maximum height, mm |
1200 |
| |
- maximum width, mm |
250 |
| 2. |
Quantity of pressing hydraulical cilinders, pcs. |
20 |
| 3. |
Piston lead of pressing hydraulical cilinder, mm |
160 |
| 4. |
Quantity of pneumatical cilinders, pcs. |
2 |
| 5. |
Pressure in pneumatic set, Mpa |
0,6 |
| 6. |
Power of el. motor of hydraulic unit, kilowatt/rev. |
4,0/1500 |
| 7. |
Overall dimensions of 12 m press (length x width x height), mm: |
13800 x 2100 x 2050 |
|
Press construction allows to glue blanks in thickness to multilayer constructional squared beam and bars.
Press can be equiped by heating system, which allows to appreciably increase it's productivity.
Management of press can be carried out by 2 operators.
Ready-made packages unload from press using conveyor, which allows to include given process into automated productional - technological schemes.
|
|
|
